H3C Technologies H3C S7500E Series Switches - Manual (Page 63)

3-24
To do… Use the command… Remarks
Create a VLAN interface and enter
VLAN interface view
interface vlan-interface
vlan-interface-id
Required
If the VLAN interface already
exists, the command enters the
VLAN interface view.
Specify an IP address for a VLAN
interface
ip address ip-address { mask |
mask-length }
Required
By default, no IP address is
specified for a VLAN interface.
Return to system view quit —
Enable display of copyright
information
copyright-info enable
Optional
Enabled by default.
Enter one or multiple VTY user
interface views
user-interface vty first-number
[ last-number ]
—
Enable the terminal
service
shell
Optional
Enabled by default.
Enable the current
user interface(s) to
support either Telnet,
SSH, or both of them
protocol inbound { all | ssh |
telnet }
Optional
By default, both protocols are
supported.
The configuration takes effect next
time you log in.
Define a shortcut key
for terminating tasks
escape-key { default |
character }
Optional
By default, you can press Ctrl+C to
terminate a task.
Configure the type of
terminal display
terminal type { ansi | vt100 }
Optional
By default, the terminal display
type is ANSI.
Set the maximum
number of lines on
the next screen
screen-length screen-length
Optional
By default, the next screen
displays 24 lines.
A value of 0 disables the function.
User
interface
configuration
Set the size of history
command buffer
history-command max-size
value
Optional
By default, the buffer saves 10
history commands.