H3C Technologies H3C S7500E Series Switches - Manual (Page 74)

3-35
Authentication
mode
Configuration Remarks
Configure a
RADIUS/HWTACACS
scheme
Configure the AAA scheme
used by the domain
Remote AAA
authentication
Configure the username and
password on the AAA server
Configure the authentication
username and password
Select
an
authenti
cation
scheme
Local authentication
Configure the AAA scheme
used by the domain as local
see Configuring
Scheme Authentication
for Modem Login .
Modem login authentication changes do not take effect until you exit the CLI and log in again.
Configuring None Authentication for Modem Login
Configuration prerequisites
You have logged in to the device.
By default, you can log in to the device through the console port without authentication and have user
privilege level 3 after login. For how to log in to the device with default configuration, see Configuration
Requirements .
Configuration procedure
Follow these steps to configure none authentication for modem login:
To do… Use the command… Remarks
Enters system view system-view —
Enter one or more AUX user
interface views
user-interface aux first-number
[ last-number ]
—
Specify the none authentication
mode
authentication-mode none
Required
By default, users that log in
through the console port are not
authenticated.