H3C Technologies H3C SR8800 User Manual
Page 113
102
[RouterA-ospf-1] quit
# Configure Router B.
[RouterB] ospf
[RouterB-ospf-1] opaque-capability enable
[RouterB-ospf-1] area 0
[RouterB-ospf-1-area-0.0.0.0] mpls-te enable
[RouterB-ospf-1-area-0.0.0.0] quit
[RouterB-ospf-1] quit
# Configure Router C.
[RouterC] ospf
[RouterC-ospf-1] opaque-capability enable
[RouterC-ospf-1] area 0
[RouterC-ospf-1-area-0.0.0.0] mpls-te enable
[RouterC-ospf-1-area-0.0.0.0] quit
[RouterC-ospf-1] quit
# Configure Router D.
[RouterD] ospf
[RouterD-ospf-1] opaque-capability enable
[RouterD-ospf-1] area 0
[RouterD-ospf-1-area-0.0.0.0] mpls-te enable
[RouterD-ospf-1-area-0.0.0.0] quit
[RouterD-ospf-1] quit
6.
Configure a loose explicit route
# Configure a loose explicit route on Router A.
[RouterA] explicit-path atod enable
[RouterA-explicit-path-atod] next hop 10.1.1.2 include loose
[RouterA-explicit-path-atod] next hop 20.1.1.2 include loose
[RouterA-explicit-path-atod] next hop 30.1.1.2 include loose
[RouterA-explicit-path-atod] quit
7.
Configure MPLS TE attributes of links
# Configure the maximum link bandwidth and maximum reservable bandwidth on Router A.
[RouterA] interface GigabitEthernet 3/1/1
[RouterA-GigabitEthernet3/1/1] mpls te max-link-bandwidth 10000
[RouterA-GigabitEthernet3/1/1] mpls te max-reservable-bandwidth 5000
[RouterA-GigabitEthernet3/1/1] quit
# Configure the maximum link bandwidth and maximum reservable bandwidth on Router B.
[RouterB] interface GigabitEthernet 3/1/1
[RouterB-GigabitEthernet3/1/1] mpls te max-link-bandwidth 10000
[RouterB-GigabitEthernet3/1/1] mpls te max-reservable-bandwidth 5000
[RouterB-GigabitEthernet3/1/1] quit
[RouterB] interface POS 2/1/1
[RouterB-POS2/1/1] mpls te max-link-bandwidth 10000
[RouterB-POS2/1/1] mpls te max-reservable-bandwidth 5000
[RouterB-POS2/1/1] quit
# Configure the maximum link bandwidth and maximum reservable bandwidth on Router C.
[RouterC] interface GigabitEthernet 3/1/1