H3C Technologies H3C SR8800 User Manual
Page 195
184
[PE1-GigabitEthernet3/1/2] mpls ldp
[PE1-GigabitEthernet3/1/2] quit
# Enable L2VPN and MPLS L2VPN.
[PE1] l2vpn
[PE1-l2vpn] mpls l2vpn
[PE1-l2vpn] quit
# Create VPLS instance aaa that uses LDP signaling.
[PE1] vsi aaa static
[PE1-vsi-aaa] pwsignal ldp
[PE1-vsi-aaa-ldp] vsi-id 500
[PE1-vsi-aaa-ldp] peer 2.2.2.2
[PE1-vsi-aaa-ldp] quit
[PE1-vsi-aaa] quit
# Bind the VPLS instance aaa to GigabitEthernet 3/1/1, the interface connected to CE 1.
[PE1] interface GigabitEthernet 3/1/1
[PE1-GigabitEthernet3/1/1] l2 binding vsi aaa
[PE1-GigabitEthernet3/1/1] quit
2.
Configurations on ASBR 1.
# Configure basic MPLS.
<Sysname> system-view
[Sysname] sysname ASBR1
[ASBR1] interface loopback 0
[ASBR1-LoopBack0] ip address 2.2.2.2 32
[ASBR1-LoopBack0] quit
[ASBR1] mpls lsr-id 2.2.2.2
[ASBR1] mpls
[ASBR1–mpls] quit
[ASBR1] mpls ldp
[ASBR1–mpls-ldp] quit
# Create a remote LDP peer.
[ASBR1] mpls ldp remote-peer 1
[ASBR1-mpls-ldp-remote-1] remote-ip 3.3.3.3
[ASBR1-mpls-ldp-remote-1] quit
# Configure OSPF.
[ASBR1] ospf
[ASBR1-ospf-1] area 0
[ASBR1-ospf-1-area-0.0.0.0] network 2.2.2.2 0.0.0.0
[ASBR1-ospf-1-area-0.0.0.0] network 10.1.1.0 0.0.0.255
[ASBR1-ospf-1-area-0.0.0.0] quit
[ASBR1-ospf-1] quit
# Configure basic MPLS for GigabitEthernet 3/1/1, the interface connected to PE 1.
[ASBR1] interface GigabitEthernet 3/1/1
[ASBR1-GigabitEthernet3/1/1] ip address 10.1.1.2 24
[ASBR1-GigabitEthernet3/1/1] mpls
[ASBR1-GigabitEthernet3/1/1] mpls ldp
[ASBR1-GigabitEthernet3/1/1] quit