H3C Technologies H3C SR8800 User Manual

Page 391

Advertising

380

[PE1-mpls-ldp] quit

[PE1] interface pos2/1/1

[PE1-POS2/1/1] mpls

[PE1-POS2/1/1] mpls ldp

[PE1-POS2/1/1] quit

# Configure basic MPLS on ASBR-PE 1 and enable MPLS LDP for both ASBR-PE 1 and the interface

connected to PE 1.

<ASBR-PE1> system-view

[ASBR-PE1] mpls lsr-id 2.2.2.9

[ASBR-PE1] mpls

[ASBR-PE1-mpls] quit

[ASBR-PE1] mpls ldp

[ASBR-PE1-mpls-ldp] quit

[ASBR-PE1] interface pos2/1/1

[ASBR-PE1-POS2/1/1] mpls

[ASBR-PE1-POS2/1/1] mpls ldp

[ASBR-PE1-POS2/1/1] quit

# Configure basic MPLS on ASBR-PE 2 and enable MPLS LDP for both ASBR-PE 2 and the interface
connected to PE 2.

<ASBR-PE2> system-view

[ASBR-PE2] mpls lsr-id 3.3.3.9

[ASBR-PE2] mpls

[ASBR-PE2-mpls] quit

[ASBR-PE2] mpls ldp

[ASBR-PE2-mpls-ldp] quit

[ASBR-PE2] interface pos2/1/1

[ASBR-PE2-POS2/1/1] mpls

[ASBR-PE2-POS2/1/1] mpls ldp

[ASBR-PE2-POS2/1/1] quit

# Configure basic MPLS on PE 2 and enable MPLS LDP for both PE 2 and the interface connected

to ASBR-PE 2.

<PE2> system-view

[PE2] mpls lsr-id 4.4.4.9

[PE2] mpls

[PE2-mpls] quit

[PE2] mpls ldp

[PE2-mpls-ldp] quit

[PE2] interface pos2/1/1

[PE2-POS2/1/1] mpls

[PE2-POS2/1/1] mpls ldp

[PE2-POS2/1/1] quit

After you complete the configurations, each PE and the ASBR PE in the same AS can establish the
LDP neighbor relationship. Issue the display mpls ldp session command on the routers. The output

shows that the session status is Operational.

Configure a VPN instance on the PEs to allow the CEs to access

Advertising

This manual is related to the following products:

H3C SR6600-X, H3C SR6600, H3C S12500 Series Switches, H3C S9500E Series Switches, H3C MSR 5600, H3C MSR 50, H3C MSR 3600, H3C MSR 30, H3C MSR 2600, H3C MSR 20-2X[40], H3C MSR 20-1X, H3C MSR 930, H3C MSR 900

Popular Brands

Popular manuals