H3C Technologies H3C SR8800 User Manual

Page 185

Advertising

174

[NPE1] mpls lsr-id 2.2.2.9

[NPE1] mpls

[NPE1–mpls] quit

[NPE1] mpls ldp

[NPE1–mpls-ldp] quit

# Configure basic MPLS on the interface connected to UPE.

[NPE1] interface GigabitEthernet3/1/1

[NPE1-GigabitEthernet3/1/1] ip address 10.1.1.2 24

[NPE1-GigabitEthernet3/1/1] mpls

[NPE1-GigabitEthernet3/1/1] mpls ldp

[NPE1-GigabitEthernet3/1/1] quit

# Configure basic MPLS on the interface connected to NPE 3.

[NPE1] interface GigabitEthernet3/1/2

[NPE1-GigabitEthernet3/1/2] ip address 11.1.1.1 24

[NPE1-GigabitEthernet3/1/2] mpls

[NPE1-GigabitEthernet3/1/2] mpls ldp

[NPE1-GigabitEthernet3/1/2] quit

# Configure the remote LDP session with UPE.

[NPE1] mpls ldp remote-peer 2

[NPE1-mpls-remote-2] remote-ip 1.1.1.9

[NPE1-mpls-remote-2] quit

# Configure the remote LDP session with NPE 3.

[NPE1] mpls ldp remote-peer 3

[NPE1-mpls-remote-3] remote-ip 3.3.3.9

[NPE1-mpls-remote-3] quit

# Enable L2VPN and MPLS L2VPN.

[NPE1] l2vpn

[NPE1-l2vpn] mpls l2vpn

[NPE1-l2vpn] quit

# Configure the VPLS instance aaa that uses LDP signaling.

[NPE1] vsi aaa static

[NPE1-vsi-aaa] pwsignal ldp

[NPE1-vsi-aaa-ldp] vsi-id 500

[NPE1-vsi-aaa-ldp] peer 1.1.1.9 upe

[NPE1-vsi-aaa-ldp] peer 3.3.3.9

[NPE1-vsi-aaa-ldp] quit

[NPE1-vsi-aaa] quit

Configure NPE 3.
# Configure basic MPLS.

<Sysname> system-view

[Sysname] sysname NPE3

[NPE3] interface loopback 0

[NPE3-LoopBack0] ip address 3.3.3.9 32

[NPE3-LoopBack0] quit

[NPE3] mpls lsr-id 3.3.3.9

[NPE3] mpls

[NPE3–mpls] quit

Advertising

This manual is related to the following products:

H3C SR6600-X, H3C SR6600, H3C S12500 Series Switches, H3C S9500E Series Switches, H3C MSR 5600, H3C MSR 50, H3C MSR 3600, H3C MSR 30, H3C MSR 2600, H3C MSR 20-2X[40], H3C MSR 20-1X, H3C MSR 930, H3C MSR 900

Popular Brands

Popular manuals