H3C Technologies H3C SR8800 - Manual (Page 223)

212
# Configure the interface connected with the P router, namely GigabitEthernet4/1/1, and enable
LDP on the interface.
[PE2] interface GigabitEthernet 4/1/1
[PE2-GigabitEthernet4/1/1] ip address 10.2.2.1 24
[PE2-GigabitEthernet4/1/1] mpls
[PE2-GigabitEthernet4/1/1] mpls ldp
[PE2-GigabitEthernet4/1/1] quit
# Configure OSPF on PE 2 for establishing LSPs.
[PE2] ospf
[PE2-ospf-1] area 0
[PE2-ospf-1-area-0.0.0.0] network 10.2.2.1 0.0.0.255
[PE2-ospf-1-area-0.0.0.0] network 192.3.3.3 0.0.0.0
[PE2-ospf-1-area-0.0.0.0] quit
[PE2-ospf-1] quit
# On the interface connecting CE 2, namely GigabitEthernet 4/1/2, create an SVC MPLS L2VPN
connection. The interface requires no IP address.
[PE2] interface GigabitEthernet 4/1/2
[PE2-GigabitEthernet4/1/2] mpls static-l2vc destination 192.2.2.2
transmit-vpn-label 200 receive-vpn-label 100
[PE2-GigabitEthernet4/1/2] quit
5. Configure CE 2.
<Sysname> system-view
[Sysname] sysname CE2
[CE2] interface GigabitEthernet 4/1/1
[CE2-GigabitEthernet4/1/1] ip address 100.1.1.2 24
6. Verify your configuration.
# Display SVC L2VPN connection information on PE 1 or PE 2. The output shows that an L2VPN
connection has been established.
Display SVC L2VPN connection information on PE 1:
[PE1] display mpls static-l2vc
Total connections: 1, 1 up, 0 down
ce-intf state destination tr-label rcv-label tnl-policy
GigabitEthernet4/1/1 up 192.3.3.3 100 200 default
Display SVC L2VPN connection information on PE 2:
[PE2] display mpls static-l2vc
Total connections: 1, 1 up, 0 down
ce-intf state destination tr-label rcv-label tnl-policy
GigabitEthernet4/1/2 up 192.2.2.2 200 100 default
# Ping CE 2 from CE 1. The output shows that CE 1 and CE 2 can ping each other.
[CE1] ping 100.1.1.2
PING 100.1.1.2: 56 data bytes, press CTRL_C to break
Reply from 100.1.1.2: bytes=56 Sequence=1 ttl=255 time=150 ms
Reply from 100.1.1.2: bytes=56 Sequence=2 ttl=255 time=130 ms
Reply from 100.1.1.2: bytes=56 Sequence=3 ttl=255 time=130 ms
Reply from 100.1.1.2: bytes=56 Sequence=4 ttl=255 time=140 ms
Reply from 100.1.1.2: bytes=56 Sequence=5 ttl=255 time=80 ms
--- 100.1.1.2 ping statistics ---