H3C Technologies H3C SR8800 User Manual

Page 149

Advertising
background image

138

[RouterB-GigabitEthernet2/1/1] quit

# Configure Router E.

<RouterE> system-view

[RouterE] mpls lsr-id 5.5.5.5

[RouterE] mpls

[RouterE-mpls] mpls te

[RouterE-mpls] mpls rsvp-te

[RouterE-mpls] mpls te cspf

[RouterE-mpls] quit

[RouterE] interface GigabitEthernet 2/1/1

[RouterE-GigabitEthernet2/1/1] mpls

[RouterE-GigabitEthernet2/1/1] mpls te

[RouterE-GigabitEthernet2/1/1] mpls rsvp-te

[RouterE-GigabitEthernet2/1/1] quit

[RouterE] interface GigabitEthernet 2/1/2

[RouterE-GigabitEthernet2/1/2] mpls

[RouterE-GigabitEthernet2/1/2] mpls te

[RouterE-GigabitEthernet2/1/2] mpls rsvp-te

[RouterE-GigabitEthernet2/1/2] quit

# Configure Router C.

<RouterC> system-view

[RouterC] mpls lsr-id 3.3.3.3

[RouterC] mpls

[RouterC-mpls] mpls te

[RouterC-mpls] mpls rsvp-te

[RouterC-mpls] mpls te cspf

[RouterC-mpls] quit

[RouterC] interface GigabitEthernet 2/1/1

[RouterC-GigabitEthernet2/1/1] mpls

[RouterC-GigabitEthernet2/1/1] mpls te

[RouterC-GigabitEthernet2/1/1] mpls rsvp-te

[RouterC-GigabitEthernet2/1/1] quit

5.

Create an MPLS TE tunnel on Router B
# Configure an MPLS TE tunnel.

[RouterB] interface tunnel 3

[RouterB-Tunnel3] ip address 10.1.1.1 255.255.255.0

[RouterB-Tunnel3] tunnel-protocol mpls te

[RouterB-Tunnel3] destination 3.3.3.3

[RouterB-Tunnel3] mpls te tunnel-id 10

# Configure IGP shortcut.

[RouterB-Tunnel3] mpls te igp shortcut

[RouterB-Tunnel3] mpls te igp metric relative -1

[RouterB-Tunnel3] mpls te commit

# Enable MPLS.

[RouterB-Tunnel3] mpls

[RouterB-Tunnel3] quit

# Configure OSPF TE.

Advertising
This manual is related to the following products:

H3C SR6600-X, H3C SR6600, H3C S12500 Series Switches, H3C S9500E Series Switches, H3C MSR 5600, H3C MSR 50, H3C MSR 3600, H3C MSR 30, H3C MSR 2600, H3C MSR 20-2X[40], H3C MSR 20-1X, H3C MSR 930, H3C MSR 900

Popular Brands
Popular manuals