H3C Technologies H3C SR8800 User Manual

Page 302

Advertising
background image

291

[PE1] display mpls ldp session

LDP Session(s) in Public Network

----------------------------------------------------------------

Peer-ID Status LAM SsnRole FT MD5 KA-Sent/Rcv

---------------------------------------------------------------

2.2.2.9:0 Operational DU Passive Off Off 5/5

---------------------------------------------------------------

LAM : Label Advertisement Mode FT : Fault Tolerance

[PE1] display mpls ldp lsp

LDP LSP Information

------------------------------------------------------------------

SN DestAddress/Mask In/OutLabel Next-Hop In/Out-Interface

------------------------------------------------------------------

1 1.1.1.9/32 3/NULL 127.0.0.1 -------/InLoop0

2 2.2.2.9/32 NULL/3 172.1.1.2 -------/POS5/1/1

3 3.3.3.9/32 NULL/1024 172.1.1.2 -------/POS5/1/1

------------------------------------------------------------------

A '*' before an LSP means the LSP is not established

A '*' before a Label means the USCB or DSCB is stale

3.

Configure VPN instances on PEs to allow CEs to access.
# Configure PE 1.

[PE1] ip vpn-instance vpn1

[PE1-vpn-instance-vpn1] route-distinguisher 100:1

[PE1-vpn-instance-vpn1] vpn-target 111:1

[PE1-vpn-instance-vpn1] quit

[PE1] ip vpn-instance vpn2

[PE1-vpn-instance-vpn2] route-distinguisher 100:2

[PE1-vpn-instance-vpn2] vpn-target 222:2

[PE1-vpn-instance-vpn2] quit

[PE1] interface GigabitEthernet 3/1/1

[PE1-GigabitEthernet3/1/1] ip binding vpn-instance vpn1

[PE1-GigabitEthernet3/1/1] ip address 10.1.1.2 24

[PE1-GigabitEthernet3/1/1] quit

[PE1] interface GigabitEthernet 3/1/2

[PE1-GigabitEthernet3/1/2] ip binding vpn-instance vpn2

[PE1-GigabitEthernet3/1/2 ip address 10.2.1.2 24

[PE1-GigabitEthernet3/1/2] quit

# Configure PE 2.

[PE2] ip vpn-instance vpn1

[PE2-vpn-instance-vpn1] route-distinguisher 200:1

[PE2-vpn-instance-vpn1] vpn-target 111:1

[PE2-vpn-instance-vpn1] quit

[PE2] ip vpn-instance vpn2

[PE2-vpn-instance-vpn2] route-distinguisher 200:2

[PE2-vpn-instance-vpn2] vpn-target 222:2

[PE2-vpn-instance-vpn2] quit

[PE2] interface GigabitEthernet 3/1/1

[PE2-GigabitEthernet3/1/1] ip binding vpn-instance vpn1

Advertising
This manual is related to the following products:

H3C SR6600-X, H3C SR6600, H3C S12500 Series Switches, H3C S9500E Series Switches, H3C MSR 5600, H3C MSR 50, H3C MSR 3600, H3C MSR 30, H3C MSR 2600, H3C MSR 20-2X[40], H3C MSR 20-1X, H3C MSR 930, H3C MSR 900

Popular Brands
Popular manuals