Configuring portal detection functions, Configuring online layer 3 portal user detection – H3C Technologies H3C SecPath F1000-E User Manual
Page 133
123
Specifying an auto redirection URL for
authenticated portal users
After a user passes portal authentication, if the access device is configured with an auto redirection URL,
it redirects the user to the URL.
To specify an auto redirection URL for authenticated portal users:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Specify an auto redirection
URL for authenticated portal
users.
portal redirect-url url-string
By default, an authenticated user is
redirected to the URL the user typed in the
address bar before portal authentication.
NOTE:
To use this feature for remote Layer 3 portal authentication, the portal server must be the IMC portal server
and the IMC portal server must support the page auto-redirection function.
Configuring portal detection functions
Configuring online Layer 3 portal user detection
This feature is available only for the direct and re-DHCP portal authentication configured on a Layer 3
interface.
With online portal user detection enabled on an interface, the firewall will periodically send probe
packets (ARP requests) to the portal users of the interface to check whether the portal users are still online,
to find out portal users who get offline without logging off.
•
If the firewall receives a reply from a portal user before sending probe packets to the portal user for
the maximum number of times, it considers that the portal user is online and will keep sending
probe packets to the portal user.
•
If the firewall receives no reply from a portal user after sending probe packets to the portal user for
the maximum number of times, it considers that the portal user is offline and will stop sending probe
packets to the portal user and delete the user.
To configure online Layer 3 portal user detection:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter interface view.
interface interface-type
interface-number
N/A
3.
Configure online Layer 3
portal user detection.
access-user detect type arp
retransmit number interval interval
Not configured by default