H3C Technologies H3C SecPath F1000-E - Manual (Page 171)

161
No. Attribute Description
80
Message-Authentic
ator
Used for authentication and checking of authentication packets to prevent
spoofing Access-Requests. This attribute is used when RADIUS supports EAP
authentication.
87 NAS-Port-Id String for describing the port of the NAS that is authenticating the user.
Proprietary RADIUS sub-attributes of H3C
Table 47 Proprietary RADIUS sub-attributes of H3C
No. Sub-attribute Description
1 Input-Peak-Rate Peak rate in the direction from the user to the NAS, in bps.
2 Input-Average-Rate Average rate in the direction from the user to the NAS, in bps.
3 Input-Basic-Rate Basic rate in the direction from the user to the NAS, in bps.
4 Output-Peak-Rate Peak rate in the direction from the NAS to the user, in bps.
5 Output-Average-Rate Average rate in the direction from the NAS to the user, in bps.
6 Output-Basic-Rate Basic rate in the direction from the NAS to the user, in bps.
15 Remanent_Volume
Remaining, available total traffic of the connection, in different units for
different server types.
20 Command
Operation for the session, used for session control. It can be:
• 1—Trigger-Request
• 2—Terminate-Request
• 3—SetPolicy
• 4—Result
• 5—PortalClear
24 Control_Identifier
Identification for retransmitted packets. For retransmitted packets of the
same session, this attribute must take the same value. For retransmitted
packets of different sessions, this attribute may take the same value. The
client response of a retransmitted packet must also carry this attribute and
the value of the attribute must be the same.
For Accounting-Request packets of the start, stop, and interim update types,
the Control-Identifier attribute is ineffective.
25 Result_Code
Result of the Trigger-Request or SetPolicy operation. A value of zero means
the operation succeeded, and any other value means the operation failed.
26 Connect_ID Index of the user connection.
28 Ftp_Directory
Working directory of the FTP user.
For an FTP user, when the RADIUS client acts as the FTP server, this attribute
is used to set the FTP directory on the RADIUS client.
29 Exec_Privilege Priority of the EXEC user
59 NAS_Startup_Timestamp
Startup time of the NAS in seconds, which is represented by the time
elapsed after 00:00:00 on Jan. 1, 1970 (UTC).
60 Ip_Host_Addr
User IP address and MAC address carried in authentication and
accounting requests, in the format A.B.C.D hh:hh:hh:hh:hh:hh. A space is
required between the IP address and the MAC address.
61 User_Notify Information to be transparently sent from the server to the client.