H3C Technologies H3C SecPath F1000-E - Manual (Page 39)

29
Figure 21 Network diagram
Configuration consideration
By default, the system has created the Trust, DMZ and Untrust zones, and you only need to configure
them and deploy them.
Configuration procedure
1. Configure the Trust zone, and add interface GigabitEthernet 0/1 to the Trust zone:
a. Select Device Management > Zone from the navigation tree.
b. Click the icon of the Trust zone.
DMZ
Untrust Trust
SecPath
GE0/1
GE0/2
GE0/3
FTP server
WWW server
Internet