H3C Technologies H3C SecPath F1000-E User Manual
Page 252
242
a.
Select User Access Manager > Portal Service Management > Device from the navigation tree.
b.
Click Add to configure a portal device as follows:
Enter NAS as the device name.
Enter the IP address of the access interface on the firewall, which is 192.168.1.70.
Enter the key, which is portal, the same as that configured on SecPath.
Enable or disable IP address reallocation. To use direct portal authentication, select No from
the Reallocate IP list.
c.
Leave the default settings for other parameters and click OK.
Figure 187 Adding a portal device
4.
Associate the portal device with the IP address group:
a.
In the portal device list, click the Port Group Information Management icon for device NAS.
Figure 188 Device list
b.
Click Add to configure a port group as follows:
Enter group as the port group name.