H3C Technologies H3C SecPath F1000-E - Manual (Page 82)

72
Figure 73 Network diagram
Method 1: Configuring an interzone policy rule
# Create a periodic time range from 8:00 to 18:00 on working days (from Monday through Friday).
• Select Resource > Time Range from the navigation tree, and then click Add.
Figure 74 Configure a time range
• Type worktime in the Name field.
• Select the Periodic Time Range box.
• Set the start time to 8:00.
• Set the end time to 18:00.
• Select the Mon., Tues., Wed., Thurs., and Fri., boxes.
• Click Apply.
# Create an IP address resource.
• Select Resource > Address > IP Address from the navigation tree, and then click Add.