H3C Technologies H3C SecPath F1000-E User Manual
Page 90
80
Table 28 Configuration items
Item Description
Filter Action
Specify the action to be taken for packets matching the firewall policy:
•
Permit—Allows matched packets to pass.
•
Deny—Drops matched packets.
Content Filter Policy
Specify the content filtering template to be applied to the packets that match the
firewall policy.
6.
Click Next to enter the third page of the firewall policy configuration wizard.
Figure 85 Firewall policy configuration wizard: 3/7
7.
Configure the items on the page.
Table 29 Configuration items
Item Description
Source IP Address
(Group)
Specify the source address or source address group resource for the firewall policy.
Destination IP Address
(Group)
Specify the destination address or destination address group resource for the firewall
policy.
8.
Click Next to enter the fourth page of the firewall policy configuration wizard.