H3C Technologies H3C SecPath F1000-E - Manual (Page 70)

60
Configuring time range resources
Overview
A time range resource defines a time range, which can be referenced by an ACL or an interzone policy
to control when a rule is effective.
The following basic types of time range are available:
• Periodic time range—Recurs periodically on a day or days of the week.
• Absolute time range—Represents only a period of time and does not recur.
You can create a maximum of 256 time ranges, each with a maximum of 32 periodic statements and 12
absolute statements. The active period of a time range is calculated as follows:
1. Combining all periodic statements
2. Combining all absolute statements
3. Taking the intersection of the two statement sets as the active period of the time range
Configuring a time range resource in the Web
interface
Select Resource > Time Range from the navigation tree to enter a time range list page, as shown in Figure
62 . Click Add to enter the time range resource configuration page.
Figure 62 Time range list