H3C Technologies H3C SecPath F1000-E - Manual (Page 263)

253
Step Command Remarks
5. Configure the password
composition policy for the
user group.
password-control composition
type-number type-number
[ type-length type-length ]
Optional.
By default, the password
composition policy configured in
system view is used.
In FIPS mode, a password must
contain four types of characters.
Setting local user password control parameters
Step Command Remarks
1. Enter system view. system-view N/A
2. Create a local user and enter
local user view.
local-user user-name N/A
3. Configure the password
aging time for the local user. password-control aging aging-time
Optional.
By default, the setting for the user
group to which the local user
belongs is used; if no aging time is
configured for the user group, the
setting in system view is used.
4. Configure the minimum
password length for the local
user.
password-control length length
Optional.
By default, the setting for the user
group to which the local user
belongs is used; if no minimum
password length is configured for
the user group, the setting in
system view is used.
A password must contain at least
eight characters.
5. Configure the password
composition policy for the
local user.
password-control composition
type-number type-number
[ type-length type-length ]
Optional.
By default, the settings for the user
group to which the local user
belongs are used; if no password
composition policy is configured
for the user group, the settings in
system view are used.
In FIPS mode, a password must
contain four types of characters.
Setting super password control parameters
CLI commands include four levels: visit, monitor, system, and manage, in ascending order. Accordingly,
login users include four levels, each corresponding to a command level. A user of a certain level can only
use the commands at that level or lower levels.