Configuring an address range resource – H3C Technologies H3C SecPath F1000-E User Manual
Page 56
46
Figure 42 Host address resource configuration page
Table 10 Configuration items
Item Description
IP Address
Select either of them as the address resource form.
Domain Name
Name
Specify the name for the host address resource.
IMPORTANT:
All resources (excluding the time range resources) must have unique names.
Description
Describe the host address resource in brief.
IP Address
Specify the IP addresses for the host address resource.
•
Enter an IP address in the text box next to the Add button, and then click Add to
add it to the IP list.
•
Select one or more IP addresses in the IP list, and then click Remove to remove
them from the list.
This item is available after you select IP Address as the address resource form.
Domain Name
Specify the domain name for the host address resource.
This item is available after you select Domain Name as the address resource form.
Configuring an address range resource
Select Resource > Address > IP Address from the navigation tree, and then click the Range tab to enter
the address range resource list page, as shown in
. Then, click Add to enter the address range
resource configuration page, as shown in
.