H3C Technologies H3C SecPath F1000-E - Manual (Page 142)

132
ACL:NONE
Work-mode:stand-alone
MAC IP Vlan Interface
---------------------------------------------------------------------
0015-e9a6-7cfe 2.2.2.2 0 GigabitEthernet 0/2
On interface GigabitEthernet0/2:total 1 user(s) matched, 1 listed.
Configuring re-DHCP portal authentication
Network requirements
As shown in Figure 118 :
• The host is directly connected to the SecPath and the SecPath is configured for re-DHCP portal
authentication. The host is assigned with an IP address through the DHCP server. Before passing
portal authentication, the host uses an assigned private IP address. After passing portal
authentication, it can get a public IP address and then the user can access Internet resources.
• A RADIUS server serves as the authentication/accounting server.
Figure 118 Network diagram