Configuring service management – H3C Technologies H3C SecPath F1000-E User Manual
Page 24
14
Figure 13 Configuring an ACL rule to deny access of other hosts to SecPath on Saturday and Sunday
•
Select Deny as the operation.
•
Select time as the time range.
•
Select Source IP Address box and enter 192.168.1.0 and 0.0.0.255 in the following fields.
•
Click Apply.
# Configure an ACL rule to allow other hosts to access SecPath.
•
On the page displaying rules of ACL 2000, click Add.
Figure 14 Configuring an ACL rule to allow other hosts to access SecPath
•
Select Permit.
•
Click Apply.
NOTE:
The three ACL rules must be configured in the shown order.
Configuring service management
# Associate HTTP service with ACL 2000.
•
Select Device Management > Service Management from the navigation tree. Associate HTTP
service with ACL 2000.