H3C Technologies H3C SecPath F1000-E User Manual
Page 243
233
Figure 173 Adding a charging plan
3.
Add a service:
a.
Click the Service tab, and then select Access Service > Service Configuration from the
navigation tree.
b.
Click Add to configure a service as follows:
Enter Portal-auth/acct as the service name and set the service suffix to dm1. The service suffix
represents the authentication domain for the portal user. With the service suffix configured, you
must configure the access device to send usernames that carry domain names to the RADIUS
server.
Select UserAcct as the charging plan.
Configure other parameters as needed.
c.
Click OK.
Figure 174 Adding a service
4.
Add an access user account:
a.
Click the User tab, and then select Access User View > All Access Users from the navigation
tree.
b.
Click Add to configure an access user account as follows: