H3C Technologies H3C SecPath F1000-E - Manual (Page 172)

162
No. Sub-attribute Description
62 User_HeartBeat
Hash value assigned after an 802.1X user passes authentication, which is
a 32-byte string. This attribute is stored in the user list on the NAS and is
used for verifying the handshake messages from the 802.1X user. This
attribute exists in only Access-Accept and Accounting-Request packets.
140 User_Group
User groups assigned after the SSL VPN user passes authentication. A user
may belong to more than one user group. In this case, the user groups are
delimited by semi-colons. This attribute is used for cooperation with the SSL
VPN device.
141 Security_Level
Security level assigned after the SSL VPN user passes security
authentication.
201 Input-Interval-Octets Bytes input within a real-time accounting interval.
202 Output-Interval-Octets Bytes output within a real-time accounting interval.
203 Input-Interval-Packets Packets input within an accounting interval, in the unit set on the device.
204 Output-Interval-Packets Packets output within an accounting interval, in the unit set on the device.
205 Input-Interval-Gigawords Result of bytes input within an accounting interval divided by 4G bytes.
206
Output-Interval-Gigaword
s
Result of bytes output within an accounting interval divided by 4G bytes.
207 Backup-NAS-IP Backup source IP address for sending RADIUS packets.
255 Product_ID Product name.
Configuring AAA at the CLI
To configure AAA, you must complete these tasks on the NAS:
1. Configure the required AAA schemes.
{
Local authentication—Configure local users and the related attributes, including the usernames
and passwords of the users to be authenticated.
{
Remote authentication—Configure the required RADIUS, and HWTACACS schemes. You must
configure user attributes on the servers accordingly.
2. Configure AAA methods for the users' ISP domains.
{
Authentication method—No authentication (none), local authentication (local), or remote
authentication (scheme)
{
Authorization method—No authorization (none), local authorization (local), or remote
authorization (scheme)
{
Accounting method—No accounting (none), local accounting (local), or remote accounting
(scheme)