Torso Electronics T-1 16-Track Algorithmic Desktop Sequencer - Manual (Page 106)

106 The T-1 Notebook : Reference & Guide
NOTES
The parameter selects the speed of acceleration or deceleration applied as
the behaviour for each of the pace directions. The pace operates across
the repeat number.
▌ CHANGING REPEAT ACCELERATION OR DECELERATION PACE
1. Select the pattern and track.
2. To view the current offset setting, Hold [CTRL] + Press (PACE).
3. To change the pace;
• While viewing pace page, Press [VB9] - [VB11] to adjust the
acceleration of repeats. Press [VB12] - [VB15] to adjust the
deceleration of repeats. The precise number can be selected with
[VB1] - [VB7] value buttons.
• Press [CTRL] + Turn (PACE) to iteratively change the pace setting
on each rotary ‘click’. Clockwise for deceleration and counter-
clockwise to acceleration.
• Press [CTRL] + Hold & Turn (PACE) to select the pace setting
iteratively on each rotary ‘click’. Clockwise for deceleration and
counter-clockwise to acceleration. Slowest method but most visual.
Rhythmic Variation
4