Torso Electronics T-1 16-Track Algorithmic Desktop Sequencer - Manual (Page 71)

71 The T-1 Notebook : Reference & Guide
NOTES
Rhythmic Patterns
3
3.9 Pattern Quantize
Quantization is a time based parameter linked to the pattern and serves
two purposes:-
• Quantize ensures synchronisation with the transport control and is
based on the time setting selected.
• Quantize determines the current pattern playback time duration
before the next queued pattern will start to play.
Quantize operates and is stored at pattern level and is part of the setup
section of the T-1 parameters.
▌ SELECTING A QUANTIZE SETTING
1. Hold [CTRL] + Press (QUANTIZE) will temporarily view the state until
the knob is released.
2. Value button state. The active quantize is displayed on a value button
illuminated WHITE ⬛ . Top row and 16 th button, GREEN ⬛ Indicates
quantize in bar lengths. Bottom row DARK GREEN ⬛ indicates
available sub divisions.
3. Selecting a quantize option. Hold [CTRL] + Turn (QUANTIZE) to quickly
view and change. When quantize is displayed, Press [VBx] Where ‘x’ is
value button 1-8, 16, 10-12.
Quantize View Mode.
Quantize View
Hold [CTRL] + (QUANTIZE).
WHITE ⬛
Selected quantize
GREEN ⬛
Bars
DARK GREEN ⬛
Sub Divisions
1 3
1/4 1/2
6 2 5 4
1/8
7 8
16
Quantize Options Group Value Button Option Colour
1, 2, 3, 4, 5, 6, 7, 8, 16 Bars 1, 2, 3, 4, 5, 6, 7, 8,16 GREEN ⬛
1/2, 1/4, 1/8 Sub Divisions 11, 12, 13 DARK GREEN ⬛
Quantize and Length are controlled by the same physical knob. Quantize is the secondary
function accessible using [CTRL].