Torso Electronics T-1 16-Track Algorithmic Desktop Sequencer - Manual (Page 34)

34 The T-1 Notebook : Reference & Guide
Generic Setup
2
NOTES
2.4 Control Overview
T-1 consists of 18 Rotary / Push knobs and 23 pad buttons.
The control knobs are endless encoders with a ‘click’ on rotation
that adjusts the designated parameter. For example 1 click will
change by +/-1BPM with Tempo. White labels indicate the primary
function. Grey text below indicates the secondary function
accessed by using [CTRL] + (Knob).
Pressing a knob will display the designated parameter state as
shown on the illuminated buttons. Also Turn to adjust while
viewing the parameters setting. This behaviour can be changed in
config settings.
Quickly, double press a control knob to lock the designated
parameter setting display on the value buttons button. This will
release when the same knob is pressed again.
Buttons are pressed to select functions. The colour of the button
illumination will determine the state of the designated function.
Colours will change depending on the context and mode in
currently in operation.
Pressing the [BANK] button in any mode will revert to the ‘home’
tracks view mode. This is an additional function for the banks
button in addition to selecting a bank.
The [CTRL] button is held with other functions in order to access
the secondary function.
1. Press [PLAY] button will play or stop the pattern. The button will
flash white every quarter note when playing. Button is orange if a
Link session is connected and synchronised.
2. Press [CTRL] + [PLAY] excludes MIDI devices, Link send and
analog reset commands.
3. Hold [CLEAR] + [PLAY] to kill any stuck MIDI notes.
The button illumination state and colour will reflect the current
mode. The 16 Value buttons act as visual feedback indicators to
display available options and settings specific to the mode selected.
bank
s
a
ve
c
tr
l