Torso Electronics T-1 16-Track Algorithmic Desktop Sequencer - Manual (Page 43)

43 The T-1 Notebook : Reference & Guide
Generic Setup
2
Function Action T-1 Sequencer Command Description
Steps View Steps Hold (STEPS) Sequencer view - display steps value button page.
Steps Edit Steps Turn (STEPS)
Adjust Euclidean step count up to 16 steps. Also Press & Turn
to change while visualising.
Steps Edit Steps Hold (STEPS) + Press [VBx] Adjust step count while visualising step sequencer view.
Steps Extend Steps Hold [CTRL] + Turn (STEPS)
Adjust the step count beyond 16 and up to 64 steps
distributed as 16 steps per page, max 4 pages.
Steps Step Pages Hold [CTRL] + Button
In step sequencer view. Bank, Pattern Temp, Mute buttons
represents each step page 1,2,3 and 4 respectively.
Steps Retrigger Step Press [CLEAR]
Apply a retrigger step when in step view. Resets sequence
parameters
Pulses View Pulses Hold (PULSES) Display pulses sequencer view, value button page
Pulses Edit Pulses Turn (PULSES)
Adjust Euclidean pulse count and population while visualising
pulse sequencer view. Also use Press & Turn.
Pulses Manual Pulses Press [VBx]
Pulse sequencer view, press value buttons to select / deselect
pulses. Not affected by Euclidean edits.
Pulses Step Edit Mode Press [CTRL] + [VBx]
Step edit view, to select / deselect step editable pulses and
turn (knob) to lock one or more parameters to a step.
Pulses Step Edit Exit Press [BANK] Exit step edit view and edit mode.
Pulses Rotate Hold [CTRL] + Turn (PULSES) Rotate pattern track start point.
Pulses Note Length Turn (SUSTAIN) Adjust note length with respect to division.
Division Edit Note Division Turn (DIVISION) Adjust the time signature division for the track pattern.
Division Edit Note Division Press & Turn (DIVISION)
Adjust the time signature division for the track pattern while
viewing the value button division status
Division Edit Note Division Hold (DIVISION) + Press [VBx]
Adjust the time signature division for the track pattern while
viewing the value button division status
Division Free Division [CTRL] + Turn (DIVISION) Change the division free form in 96 PPQN resolution
Length Reduce Length Turn (LENGTH) Reduce the sequence length
Length Random Start Press [CLEAR] Sets a random start point when playing. Glitched playback.
Length Random Start [CLEAR] + Turn (LENGTH)
Sets a random start point when playing and changing length
value. Glitched playback.
Velocity Base Velocity Turn (VELOCITY) Set the base velocity for notes
Accent Variation Velocity Turn (ACCENT) Applies the amount of groove template to the velocity profile
Groove Select Groove Turn (GROOVE)
Selects one of 8 groove templates. Also use [VBx] when
displaying groove view.
Timing Micro-timing Turn (TIMING) Adjust the micro timing of some notes earlier or later
Delay Note delay [CTRL] + Turn (DELAY) Adjust all notes earlier or later
Probability Chance [CTRL] + Turn (PROBABILITY) Applies the chance of a note bing silent