Torso Electronics T-1 16-Track Algorithmic Desktop Sequencer - Manual (Page 188)

188 The T-1 Notebook : Reference & Guide
8.19 MIDI Application Example - Desktop Synth Presets
Program Change messages allow T-1 to change a preset, pattern or patch on a destination device
using MIDI messaging. The behaviour is dependant on the connected device.
Example Configuration: T-1 Controlling Elektron Digitakt
MIDI In
MIDI Out
Off Off Off
On On
On
On On
MIDI trs
Notes Start / Stop Clock Prg. Change
In
Out
T-1 Config
Prg. Change set to On. Others are set as defaults.
MIDI Adapter from Output
Prog Change on Channel 1 and 2
Primary lead is T-1 which controls transport and clock
synchronised in the Digitakt secondary follower.
G02 = Bank 15, Pattern 2
G01 = Bank 15, Pattern 1
Patterns are changed in Digitakt when a
pattern changes in T-1.
Digitakt patterns numbered A01 - H16
Pattern Changes
Digitakt Environment
T-1 Environment
MIDI Config
USB CONFIG
USB Audio/MIDI = On
If used with USB connection
SYNC:
Clock Receive = On
Transport Receive = On
PORT CONFIG:
Input From = MIDI or MIDI+USB
Receive Notes = On
Receive CC/NRPN = On
CHANNELS:
Prog Chg In Ch = 2
System
G02
G01
MIDI & WiFi Connectivity
8