Torso Electronics T-1 16-Track Algorithmic Desktop Sequencer - Manual (Page 37)

37 The T-1 Notebook : Reference & Guide
NOTES
▌ SAVING A BANK
1. Edited, unsaved banks will illuminate PINK ⬛ and in addition, will also
flash if the pattern if playing when holding [BANK].
2. To save a bank. Hold [CTRL] + [BANK] + [VBx], ‘x’ is the bank to save.
3. The bank and value button will flash pink indicating the bank is saved
and then turn green or white if it is the selected bank.
4. Release the buttons once save is complete.
▌ RELOADING FROM A SAVED BANK
1. Hold for 1 second, [BANK] + [VBx], where ‘x’ is the current bank to
reload and is represented by value buttons 1-16.
2. The value button will flash green.
3. The previously saved bank in the slot is reloaded.
4. All banks are reloaded at once when the T-1 is powered up while
holding [BANK].
▌ SELECTING A PATTERN
2. Hold [PATTERN] + [VBx], where ‘x’ is the pattern to select within the
current bank. Value buttons represent patterns.
• Currently selected pattern is WHITE ⬛ .
• Available empty pattern slots are DARK BLUE ⬛ and edited pattern
slots are illuminated BLUE ⬛ .
• The pattern pending play is illuminated WHITE ⬛ . This is often also
the currently active pattern.
3. If the sequence is playing, the new pattern will be queued to change at
the end of the current pattern. If the sequence is not playing the pattern
is simply selected for editing.
4. Once the pattern is selected release the [PATTERN] button.
Generic Setup
2