Torso Electronics T-1 16-Track Algorithmic Desktop Sequencer - Manual (Page 83)

83 The T-1 Notebook : Reference & Guide
NOTES
▌ ADJUSTING THE NOTE LENGTH USING SUSTAIN
1. Select the pattern and track.
2. To view the current note length Hold (SUSTAIN). Also double Press
(SUSTAIN) to lock the view. The value buttons will be lit to indicate the
current note length. Default is 50%, which is one division, indicated by
the top row of 8 buttons.
3. The length will be applied to all notes and repeats. Any new notes
triggered before the prior note ends will cut off the previous note. The %
is applied with respect to the division setting.
4. To change the length value either:-
• Turn (SUSTAIN). This will adjust the value. Although state is
visualised, It is useful to adjust length by ear.
• Hold and Turn (SUSTAIN). This will make granular changes with the
value displayed on the value button brightness.
• While the value buttons are showing the sustain state, press one of
the [VB1] - [VB16] buttons. This is the best method for specific
changes where [VB16] represents 100% and [VB8] 50%.
Rhythmic Variation
4