Torso Electronics T-1 16-Track Algorithmic Desktop Sequencer - Manual (Page 74)

74 The T-1 Notebook : Reference & Guide
NOTES
Rhythmic Patterns
3
3.12 Clearing Patterns and Tracks
Tracks, Patterns and Parameters can be cleared and reset to a default
state. Tracks and patterns will revert to an original empty state and
parameters set to defaults. There is no ‘undo’ when clearing patterns,
tracks and parameters and it should be remembered that this is a
destructive action.
▌ CLEARING A TRACK
1. Ensure track mode is in view. Press [BANK] to return ‘home’.
2. Hold [CLEAR] + [VBx], where ‘x’ is the track to clear represented by
value buttons 1-16.
3. The track value button will flash red and its settings are cleared.
▌ CLEARING A PATTERN
1. Hold [CLEAR] + [PATTERN] + [VBx], where ‘x’ is the pattern to clear
represented by value buttons 1-16.
2. The value button for the pattern will flash red and the pattern and its
sequence data is cleared.
▌ CLEARING AN INDIVIDUAL PARAMETER SETTING
1. Hold [CLEAR] + Press (Knob), where ‘Knob’ is the parameter control to
clear represented by the rotary knobs.
2. The track value button will flash red and the parameter is reset.