System configuration – Torso Electronics T-1 16-Track Algorithmic Desktop Sequencer User Manual
Page 207
A number of under the hood settings that
control global or system specific functions exist
in T-1. These settings allow selection of options
for user experience, general settings and
connectivity
configurations.
As
with
all
connected applications, It is important when
configuring the input and output connectivity
settings to apply these correctly to match the
destination device. Often once set many of
these parameter settings can be left alone. The
out of the box configurations are generally ok
for many applications, especially as a starting
point. Alternate settings are also possible when
the
need
arises. Torso
Electronics
have
developed a free configuration tool and utility
for accessing and editing T-1’s settings. The
‘T-1 Config’ tool can be downloaded from the
website, located in the
resources section of the site. T-1 Config
versions are available which are compatible
with Intel and M1 Mac’s and Windows PC’s.
The
PC/Mac
hosting T-1
Config
is
then
connected to the T-1 sequencer using the USB
connection
and
cable.
This
book
shows
illustrations
and
instructions
based
on
a
Macbook view but these will be similar for PC
based applications. T-1 Config is essential when
setting up the MIDI and Analog input and output
settings. The specific details of which will be
covered in the respective sections. Guidance on
firmware updates is also covered in this section.
This chapter therefore gives an overview of the
config
pages
and
parameters.
In
depth
application, use of connectivity options and
synchronisation is explained in the relevant
sections. This section therefore concludes the
coverage of T-1 sequencer.
System Configuration
207
The T-1 Notebook : Reference & Guide
10