Torso Electronics T-1 16-Track Algorithmic Desktop Sequencer - Manual (Page 39)

39 The T-1 Notebook : Reference & Guide
2.7 Clear and Copy Bank
There are two editing options that can be applied to multiple T-1 functions.
Copy can be used to duplicate elements such as banks, tracks and patterns
while clear will reset to an empty or default state. The [CLEAR] button will
be used in conjunction with another function and additionally [CTRL] is
used when accessing [COPY]. Examples are shown for banks.
▌ CLEARING A BANK
1. Hold [CLEAR] + [BANK] + [VBx], where ‘x’ is the existing saved bank to
clear represented by value buttons 1-16. Keep [CLEAR] + [BANK] Held
through the process.
2. The value button will flash. Release [CLEAR] + [BANK] to exit without
clearing at this point.
3. With [CLEAR] + [BANK] still held, press [VBx] again to confirm clear.
4. The selected bank is cleared. Clear will permanently remove the banks
and cannot be undone. Unsaved, empty banks are already empty and
cannot therefore be cleared.
Hold [CLEAR] + Target, when using the clear option.
Target is the function to clear.
NOTES
Generic Setup
2