Torso Electronics T-1 16-Track Algorithmic Desktop Sequencer - Manual (Page 177)

177 The T-1 Notebook : Reference & Guide
NOTES
FX Tracks allow the processing of incoming MIDI through the track. The T-1
features can be applied therefore to the MIDI notes. Think of this as
replacing the pitch menu as the source of notes and chords.
▌ CREATING AN FX TRACK
1. Press [BANK] to ensure the ‘home’ track view is in focus.
2. Select a track to edit. Press [VBx] where ‘x’ is the value button for the
track to select. By default a Note track is lit ORANGE ⬛ .
3. Press [CTRL] + [VBx] where ‘x’ is the value button for the track to
assign as a FX Track. This will cycle through the assigned modes
between Note, CC Track and FX Track. Set the track to an FX Track
mode where the value button will illuminate MAGENTA
⬛ .
4. Any incoming MIDI is processed through any enabled FX track and the
associated parameter settings. If pulses are present the incoming notes
or chords are applied to the pulse. If no pulses are set the MIDI will be
transferred through as it is received.
5. The MIDI output will be fed to all of the assigned MIDI Channels. Set
the channels by holding (CHANNELS) + [VBx]. Multiple channels can
be assigned to the same track.
6. An audio device connected to the MIDI output will be controlled.
▌ HARMONISING INCOMING MIDI IN AN FX TRACK
1. Ensure the track is set to an FX Track mode where the value button will
illuminate MAGENTA ⬛ . Any incoming MIDI is processed through any
enabled FX track and the associated parameter settings. If pulses are
present the incoming notes or chords are applied to the pulse. If no
pulses are set the MIDI will be monitored real time as it is received.
2. To view the incoming MIDI notes, Hold [CTRL] + Hold (PITCH). To view
the pitch menu
3. Hold [CTRL] + Turn (PITCH). Also While holding [CTRL] + (PITCH),
press a [VBx] to select a note for harmonisation or Press [VB8] or
[VB16] to transpose the notes.
MIDI & WiFi Connectivity
8