Torso Electronics T-1 16-Track Algorithmic Desktop Sequencer - Manual (Page 148)

148 The T-1 Notebook : Reference & Guide
NOTES
7.5 Arranging Cycles
Cycles can be copied and pasted into other cycle slots. Cycle 1-16 can be
copied to any other 1-16 slots. Note that while cycles can be copied to
inactive slots, this will require a cycle to be active in order for it to play.
Multiple cycles can also be selected and edited together.
▌ COPYING & PASTING OF CYCLES
1. Select the pattern and track.
2. To view the cycle page, Hold or double tap (CYCLES).
3. Copy / Paste can be performed in or out of edit mode.
4. Keep holding [CTRL] + [COPY] throughout.
5. To copy a cycle, Hold [CTRL] + [COPY] + Press [VBx] value button of
the source cycle ‘x’ to copy. Keep holding [CTRL] + [COPY].
6. The button will flash GREEN ⬛ to indicate copy to clipboard.
7. While still holding [CTRL] + [COPY] + Press [VBx] to paste into the
destination cycle slot ‘x’.
8. The destination button will flash GREEN ⬛ to indicate paste.
9. Note that existing cycles are overwritten.
Copy
+ [VB2]
Paste
+ [VB6]
Hold [CTRL] + [COPY] throughout
Cycles, in this case [VB6} must be active in
order for the pasted cycle to be played.
Cycles & Random
7