Torso Electronics T-1 16-Track Algorithmic Desktop Sequencer - Manual (Page 220)

220 The T-1 Notebook : Reference & Guide
NOTES
System Configuration
10
Setting Function Description
1 Presets 4 defined preset configurations 2-Voices: Gate, Velocity and Pitch output
on Channels 1 & 2.
3-Voices: Gate and Pitch output on
Channels 1, 2 & 3.
Drum gates: Drum gates on channels 1-6
User: User defined and saved
configuration
2 Gates Gate Outputs a and b Configures the routing and format for gate
outputs a and b.
3 CV Control Voltage Outputs a,b,c,d Configures the routing and format for CV
outputs a, b, c and d.
4 Routing MIDI Channel routed to Gate/CV Selects the routing from the track MIDI
channel to the Gate or CV output
5 Function Application of the output Gate: Configures output as a gated pulse.
CV Outputs can also be configured as
gates. Gates cannot be set for CV.
Pitch: Configures a control voltage output
for pitch control with scaling and trig
configuration options available.
Velocity: Configures a control voltage
output for velocity control.
6 Scaling Format for Pitch Scaling V/Oct or Hz/Volt. This will depend on the
connected device format and compatibility.
Eurorack and Moog typically uses V/Oct.
Hz/V typically used with Korg and
Yamaha.
7 Trig Format for Trig Voltage Sets the trigger polarity type. V-Trig has a
+5V to trigger note on where S-Trig
activates at 0V and note off at +5V. Select
based on destination device.
8 Voice Stealing Voice Management Behaviour Selects option for behaviour of how voices
are managed:-
Top - Higher notes steal the voice.
Bottom - Lower notes steal the voice.
Re-trig - New note always steals the voice.