Torso Electronics T-1 16-Track Algorithmic Desktop Sequencer - Manual (Page 197)

197 The T-1 Notebook : Reference & Guide
NOTES
Analog Connectivity
9
9.3 CV & Gate Output Configurations
The CV and Gate outputs are configurable within the T-1 Config tool. Once
set these may not need further changes, however this will also depend on
the connected devices and set up. There are 4 preset configurations
available in the T-1 Config Tool as a starting point. Note that CV can be
configured as gates, but gates cannot be configured as CV.
Channel Channel Channel
Gate Gate Gate
a
a Gate Output a or b
b a
CV CV CV
MIDI MIDI MIDI
b
b
Re-Trig
CV Output a, b, c or d. Voice 3 has CV a configured as gate
New notes always steal voice
c d
V-Trig V-Trig V-Trig
+5V Trig +5V Trig +5V Trig
Pitch Pitch Pitch
V/Oct V/Oct V/Oct
Example 3-Voice Configuration
T1 Config Tool - CV/Gate Page
Voice 1
Track
Voice 2
Track
Voice 3
Track
1 2 3