Torso Electronics T-1 16-Track Algorithmic Desktop Sequencer - Manual (Page 22)

22 The T-1 Notebook : Reference & Guide
NOTES
Step 3. Creating a Plucky Lead
Track 5 will be the plucky lead sequenced from T-1 and playing to a
desktop FM Synthesizer. This could equally be a DAW. Other melodic
elements will follow.
▌ TRACK 5 - PLUCKY LEAD
1. Select Track 5, Press the fifth value button [VB5]. The default mode is
track view, if this is not visible, press [BANK] to select the default ‘home’
track view. Value button 5 will be lit ORANGE
⬛ .
2. Ensure the track has 16 Steps. Press (STEPS) to view the value
buttons. All should be lit to indicate 16 steps. The lit steps indicate
number of steps selected. Turn (STEPS) to adjust the number.
3. Press (PULSES) to view how many note events are selected. Active
step note will be lit ORANGE ⬛ . Double press to retain the pulse button
view.
4. Turn (PULSES) to add or remove the number of steps. The euclidean
sequencer will automatically distribute the number of note event pulses
equally across the total number of steps. Add 5 pulses.
5. Ensure the MIDI Channel on T-1 matches the plucky lead channel on
the destination device. Press (CHANNEL) to view the current track’s
MIDI channel. The selected channel will be lit WHITE
⬛ . Turn
(CHANNEL) to change channel. Set to channel 5, [VB5] lit.
6. Press [PLAY]. The play button will flash indicating playback is active.
The plucky lead sound on the connected audio module should be
triggered on the set beats. T-1 will loop the 16 step playback.
Getting Started
1