Torso Electronics T-1 16-Track Algorithmic Desktop Sequencer - Manual (Page 81)

81 The T-1 Notebook : Reference & Guide
NOTES
Rhythmic Variation
4
4.2 Note Length
The length of individual notes is also controlled within the groove section.
Note length is adjusted using the ‘Sustain’ Parameter and is set relative to
the ‘Division’ setting. Note length is applied to both the pulse notes and also
to any generated repeats.
The Sustain parameter is adjusted either by turning the (SUSTAIN) Knob or
by pressing the (SUSTAIN) knob and pressing the value buttons. The
percentage stated is therefore a reference of how long the note is with
respect to the selected division. The actual percentage value is not shown
other than with the illumination of the value buttons.
First Step
Pulse
Sustain
Note Length 50%
50%
0%
100%
1x Div
16x Div
Sustain > 50%
Note Length Longer than Division
Sustain < 50%
Note Length Shorter than Division
Division
1/16
Steps
Concept
Example of a 1/16 th Division and Sustain %
Bar - 16 Steps 8 Steps