Torso Electronics T-1 16-Track Algorithmic Desktop Sequencer - Manual (Page 64)

64 The T-1 Notebook : Reference & Guide
NOTES
▌ EXTENDING STEP COUNT
1. Optionally lock the step sequencer view. Double tap (STEPS). This is
not essential but is good practice to view the step state. Active steps are
displayed DIMMED BLUE
⬛ and active euclidean pulses will be lit
BLUE GREY ⬛ .
2. Extend step count. Hold [CTRL] + Turn (STEPS). The number of steps
are extended by turning clockwise, 1 step per knob ‘click’. The number
of steps are reduced by turning anti-clockwise. Inactive steps will not be
illuminated at all.
3. Step pages. While holding [CTRL] when in step sequencer view, the
current page is indicated by the page button lit WHITE ⬛ . The page in
view can be selected by holding [CTRL] and pressing the associated
page button. This only selects the page in view and does not change
active / inactive steps in the pattern. Page buttons are:-
• Page 1: Steps 1-16 - Default. Select with [BANK].
• Page 2: Steps 17-32. Select with [PATTERN].
• Page 3: Steps 33-48. Select with [TEMP].
• Page 4: Steps 49-64. Select with [MUTE].
4. Quick edit step count. If the view is not locked to step sequencer view,
the step pages can be quickly displayed by [CTRL] + Press (STEPS).
To quickly select a step page, Hold [CTRL] + (STEPS) + Page button.
5. In step page view, press [VBx] value button for the last step in order to
extend or shorten the step count.
PAGE 1
1
16
+
PAGE 1
Illustration shows Page 1 - Steps 1-16 is selected in view on the value buttons
steps
PAGE 3 PAGE 2 PAGE 4
+
Rhythmic Patterns
3