Torso Electronics T-1 16-Track Algorithmic Desktop Sequencer - Manual (Page 167)

167 The T-1 Notebook : Reference & Guide
NOTES
8.7 MIDI CC Manual Knob Control
The T-1 has a pre-defined set of CC parameter numbers assigned to the
control knobs when in CC Mode. These numbers ensure the source CC
matches up with the destination CC number. The value of the control
assigned to the CC number is then dynamically applied to the equivalent
destination parameter. The default assignments are CC70 - CC83 however
these can be redefined for each track.
# 70
# 77
# 74
# 81
# 72
# 79
# 76
# 83
# 71
# 78
# 75
# 82
# 73
# 80
With a CC track the knobs can control the
defined CC# parameters for the track
Typically CC range is 0-127 although this may differ between devices. T-1 Range is 0-127.
As well as checking the CC number, the parameter range should also be checked for the
destination device. Some parameters ranges for example may be bi-polar -64 to 63.
The parameter value sent from / to the CC#,
will be determined by the knob position.
Value sent from / to the CC#,
determined by the value button.
0 - 127
Turn (Knob) or Hold & Turn
Relative Adjustment
Hold (Knob) + [VBx]
Absolute Adjustment
MIDI & WiFi Connectivity
8