Torso Electronics T-1 16-Track Algorithmic Desktop Sequencer - Manual (Page 187)

187 The T-1 Notebook : Reference & Guide
8.18 MIDI Application Example - Desktop Synth Melody
MIDI can be connected to a desktop synth using the 5 Pin DIN and the Type A adapter. When used
with a desktop device, the MIDI DIN option is more common. This is a simple set up, useful to
control synth melodies and also synths parameters.
Example Configuration: T-1 Controlling Elektron Digitone
MIDI In
MIDI Out
Off Off Off
Off
On
On
On On
MIDI trs
Notes Start / Stop Clock Prg. Change
In
Out
T-1 Config
These are defaults.
MIDI Adapter from Output
Channel 1
Track 1 Channel 1
Primary lead is T-1 which controls transport and clock
synchronised in the Digitone secondary follower.
Digitone Environment
T-1 Environment
MIDI Config
USB CONFIG
USB Audio/MIDI = On
If using USB Connection
SYNC:
Clock Receive = On
Transport Receive = On
PORT CONFIG:
Input From = MIDI or MIDI+USB
Receive Notes = On
Receive CC/NRPN = On
System
CC#9
10
CC#10
64
CC#7
70
9 10 7
MIDI & WiFi Connectivity
8