Torso Electronics T-1 16-Track Algorithmic Desktop Sequencer - Manual (Page 17)

17 The T-1 Notebook : Reference & Guide
NOTES
Step 4. Creating a Snare Track
The snare will follow similar principles as the kick. Manual pulse note
events can be added as well as the automatic Euclidean sequenced notes.
▌ TRACK 2 - SNARE
1. Select Track 2, Press the second value button [VB2]. The default mode
is track view, if this is not visible, press [BANK] to select the default
‘home’ track view. Value button 2 will be lit ORANGE
⬛ .
2. Ensure the track has 16 Steps. Press (STEPS) to view the value
buttons. All should be lit to indicate 16 steps. The lit steps indicate
number of steps selected. Turn (STEPS) to adjust the number.
3. Double Press (PULSES) to view how many note events are selected.
Double tapping the knob will retain the visual button view where single
tap just temporarily displays the state.
4. Active step notes will be lit ORANGE ⬛ . Instead of using the Euclidean
pulse placement set the pulses manually. Tap value buttons [VB5] and
[VB13] to manually place the pulses.
5. Ensure the MIDI Channel on T-1 for track 2 matches the Snare drum
channel on the destination device. Press (CHANNEL) to view the
current track’s MIDI channel. The selected channel will be lit WHITE
⬛ .
Turn (CHANNEL) to change channel. Value button [VB2] should be lit
for MIDI channel 2.
6. Press [PLAY]. The play button will flash indicating playback is active.
The kick and snare sounds on the connected audio module should be
triggered on the set pulse beats. T-1 will loop the 16 step playback.
Track buttons will flash when a pulse is triggered.
Getting Started
1