Torso Electronics T-1 16-Track Algorithmic Desktop Sequencer - Manual (Page 147)

147 The T-1 Notebook : Reference & Guide
NOTES
7.4 Clearing Cycles
Individual cycles and also all automation for a parameter can be cleared
and reset to an original state.
▌ CLEARING CYCLES
1. Select the pattern and track.
2. To view the cycle page, Hold or double tap (CYCLES).
3. Press [CLEAR] + Press [VBx] for the value button that represents the
cycle to clear and reset to the original value. This function operates in or
out of edit mode.
4. The selected cycle is cleared and reset to original values. The button
will flash to confirm
▌ CLEARING PARAMETER AUTOMATION
1. Select the pattern and track.
2. To view the cycle page, Hold or double tap (CYCLES).
3. Press [CLEAR] + Press (Knob) for the parameter automation to clear
and reset. This function operates in or out of edit mode.
4. The selected parameter automation is cleared and reset to original
values. Note that some parameter resets will also affect other
parameters. For example if repeats and pitch are set to a cycle and
pitch is cleared, the repeats also will be removed. However if only
repeats are removed, pitch will stay in tact.
Cycles & Random
7