Torso Electronics T-1 16-Track Algorithmic Desktop Sequencer - Manual (Page 203)

203 The T-1 Notebook : Reference & Guide
Analog Connectivity
9
9.9 Analog Application Example - T-1 Controlling a Synth Voice
Synth voice control at a minimum consists of triggering a note on/off and setting the note pitch.
Other parameters such as velocity modulation may also exist. External gear pitch may need tuning
to ensure a transmitted note value at the destination device matches the desired note.
Example Configuration: T-1 with Modbap Modular’s Osiris Eurorack Module
a
Gate
a
CV
Patch Cables
Eurorack + Osiris Environment
Osiris is a wavetable synth module with a single WT voice plus a sub wave
underlying the main. This example controls the main WT voice.
T-1 Tracks assigned to Channel 1 will be routed to
the CV ‘a’ and Gate ‘a’ outputs.
Osiris default key settings:
• Pitch may need adjusting to ensure correct
calibration of notes sent to note played.
0V is Calibrated in T-1 to note C3.
• Notes triggered from T-1
T-1 Environment
Channel 1
Channel 1 Pitch
Re-trig
Re-trig
V-trig
V-trig
Routing Function Scaling Trig Voice stealing
gate a
cv a V/Oct