Torso Electronics T-1 16-Track Algorithmic Desktop Sequencer - Manual (Page 164)

164 The T-1 Notebook : Reference & Guide
NOTES
The option to re-configure the MIDI Thru connection as a second MIDI out
is possible within the config options. Instead of the default behaviour where
the MIDI through reflects the MIDI incoming messages, the MIDI thru will
reflect the MIDI Out messages.
T-1 Config - MIDI i/o Page
Thru Port Functionality
When set to ‘Thru’ the MIDI Thru trs port located at the rear of the device will act as
normal, reflecting any incoming MIDI messages from the MIDI in connection also to the
thru port. When this is set to ‘Out’ the MIDI Thru trs port at the rear will operate as a
second MIDI output port. This will reflect the MIDI messages sent to the out also at the
thru trs port. An additional set of MIDI trs ‘Out2’ options will also be available for
configuration specifically of this second output.
MIDI Thru
Default behaviour is for the MIDI in
messages to be also directed to the MIDI
Thru port. MIDI out is independent.
MIDI Out 2
Optional behaviour is for MIDI Out messages
to be also directed to the MIDI Thru port as a
2
nd Output. MIDI In is independent.
t|so
MIDI & WiFi Connectivity
8