FANUC Robotics America GFK-1541B - Manual (Page 206)

GFK-1541B Appendix B Communications Port Characteristics B-5
B
Part Numbers for GE Fanuc Cables and Converters
It is recommended that you use cables available from GE Fanuc Automation to connect your PC
to this port. Refer to the table below for part numbers.
Cables for Connecting the 15-Pin, D-Type, RS-485 Port to the RS-232 Port on a PC
Part Number Description
IC690ACC901 GE Fanuc/Horner Mini Converter with Cable (see the following figure.), or
IC690ACC900 GE Fanuc Converter only (requires cable IC690CBL303 and either
IC690CBL702 or IC690CBL705 below)
IC690CBL303 15-pin RS-422 Serial Cable
IC690CBL702 9-pin RS-232 Serial Cable
IC690CBL705 25-pin RS-232 Serial Cable
Cable Assembly IC690ACC901
Cable assembly IC690ACC901 is needed to connect the 9-pin or 25-pin serial port on a personal
computer to the 15-pin, D-type, RS-485 port on the Ethernet Interface. Use the 9-pin to 25-pin
adapter to connect to the 25-pin serial port on the personal computer.
a45484c
Part Number
9-Pin
Female
Connector
25-Pin
Female
Connector
9-Pin
Male
Connector
HE693SNP232 SNP TO RS232
ADAPTER
HE693XTADP
TO THE 15-PIN, D-TYPE, RS-485 PORT
ON THE ETHERNET INTERFACE
TO THE 9-PIN SERIAL PORT
ON THE PERSONAL COMPUTER
Use the 9-pin to 25-pin adapter to connect to
the 25-pin serial port on the personal computer
NOTE:
www.cadfamily.com EMail:[email protected]
The document is for study only,if tort to your rights,please inform us,we will delete