FANUC Robotics America GFK-1541B - Manual (Page 239)

Index
Index-4 TCP/IP Ethernet Communications for the Series 90™ PLC User's Manual– May 2002 GFK-1541B
new style Series 90-30 Ethernet Interface, 2-5
Series 90-30 CPU364 with Embedded Ethernet
Interface, 2-19
Powering-up
new style IC693CMM321, 2-12
Power–up problems, 2-12, 2-26, 2-37, 2-51
Power-up states
new style IC693CMM321, 2-13
Series 90-30 CPU364, 2-27, 2-38
Series 90-70 TCP/IP Ethernet Interface (Type
2), 2-52
Private Networks, IP addresses, 6-3
Problems During Power up, 2-12, 2-26, 2-37,
2-51
Produced Data Exchange Definition, 5-12
Producer, 5-3
Producer ID, 5-3
R
Reference assignments for Modbus, E-1
Reloading Ethernet Interface software, 2-4, 2-
18, 2-42
Remote PLC, 3-10, 3-15, 3-17, 4-9, 4-10, 4-12,
4-14, 4-15, 4-17, 4-18, 4-19
Repetitions, number of for Channel
Commands, 3-11, 3-18, 3-23, 4-9, 4-12,
4-14, 4-15, 4-17, 4-18, 4-19
Resource problem bit, 3-34, 4-22
Restart, 2-17, 2-31, 2-42
Restart Pushbutton
new style Series 90-30 Ethernet Interface, 2-3
Series 90-30 CPU364, 2-17, 2-31
Series 90-70 Ethernet Interface (Type 2), 2-42
Re-tasking a channel, 3-9
Retrieve Detailed Channel Status command
(2002), 3-29
RJ11 Serial Port, B-2
RS-232, RJ11 port, B-2
RS-232, RJ-11 port
Series 90-30 CPU364, 2-19, 2-31
Series 90-70 Ethernet Interface (Type 2), 2-43
RS-485 port, B-4
Series 90-70 Ethernet Interface (Type 2),
2-43
Cables and Converters, B-5
S
Sample ladder program, 3-43, 4-26
Send Information Report command (2010), 3-
23
Sequencing communications requests, 3-47, 4-
34
Serial Number Label
Series 90-30 CPU364, 2-5, 2-20, 2-31
Serial port configuration
data rate, 2-10
Data rate, 2-25, 2-35, 2-50
Flow control, 2-10, 2-25, 2-35, 2-50
Parity, 2-10, 2-25, 2-35, 2-50
Stop bits, 2-10, 2-25, 2-50
Timeout, 2-10, 2-25, 2-50
Turnaround delay, 2-10, 2-25, 2-50
Serial Ports
IC693CPU364, 2-25, 2-35
new style IC693CMM321, 2-5
Series 90-30 CPU364, 2-19
Series 90-30 CPU364 with Embedded Ethernet
Interface
10Base-T Port, 2-19
AAUI (Transceiver) Port, 2-19
Board Indicators, 2-17, 2-30
Configuration Parameters, 2-23, 2-34
Configuring, 2-22, 2-33, 2-47
Ethernet Ports, 2-19, 2-31
Installing, 2-21, 2-32
Replaceable Fuse, 2-5, 2-20
Requirements to Install, 2-21, 2-32
Restart Pushbutton, 2-17, 2-31
RS-232, RJ-11 port, 2-19, 2-31
Serial Number Label, 2-5, 2-20, 2-31
Serial Ports, 2-19
States, 2-27, 2-38
Station Address Label, 2-5, 2-20, 2-31
Series 90-30 Ethernet Interface
AAUI (Transceiver) Port, 2-5
States, 2-13
Series 90-70 Ethernet Interface
Using with PLC CPUs (Versions 4.12 - 5.50),
D-1
Series 90-70 Ethernet Interface (Type 2)
10Base2, BNC Port, 2-44
10Base-T, RJ-45 Port, 2-44
AUI (Transceiver) Port, 2-44
Board Indicators, 2-41
Configuration Parameters, 2-49
Ethernet Ports, 2-44
Installing, 2-45
Jumper, 10Base2 Port, 2-44
Requirements to Install, 2-45
Restart Pushbutton, 2-42
RS-232, RJ-11 Port, 2-43
RS-485, D-Type Port, 2-43
Service Option Connetor, 2-43
States, 2-52
Station Address Label, 2-44
Server Capability, 1-2
Server PLC, 3-10, 3-15, 3-17, 4-9, 4-10, 4-12,
4-14, 4-15, 4-17, 4-18, 4-19
Service Option Connector, 2-43
Series 90-70 Ethernet Interface (Type 2), 2-43
www.cadfamily.com EMail:[email protected]
The document is for study only,if tort to your rights,please inform us,we will delete