Power requirement, Led indicator lights – FANUC Robotics America GFK-1541B User Manual
Page 216
ristics
B-15
B
IC649AEA102 Ethernet 10Base–T Transceiver
• Compliant with the IEEE 802.3 Ethernet specification for 10BASE–T.
• Connector on transceiver body is standard RJ–45 type for connection to unshielded twisted
pair (UTP) Ethernet cable. .
• This unit has an attached 40” (1 meter) cable with standard 14–pin AAUI connector for
connecting to a Series 90–30 Ethernet module (IC693CMM321) or CPU with Ethernet
interface (IC693CPU364).
• SQE option is enabled.
• Power and Link Integrity LED indicator lights.
LI
40 inches (1 meter)
14-Pin AAUI
Connector
8-Pin RJ-45
Connector
3.5" (89 mm)
1"
(25mm)
1.8"
(46mm)
8 9 10 1112 13 14
7 6 5 4 3 2 1
Power Requirement
This unit draws 60 mA @ 5Vdc from the Ethernet interface via the AAUI connector.
LED Indicator Lights
These are located on the end of the unit next to the RJ–45 connector. The one labeled LI stays on
as long as Link Integrity is maintained. The one marked with a “jagged arrow” symbol indicates
the presence of 5Vdc power to the unit.
The document is for study only,if tort to your rights,please inform us,we will delete