FANUC Robotics America GFK-1541B - Manual (Page 35)

2-22 TCP/IP Ethernet Communications for the Series 90™ PLC User's Manual – May 2002 GFK-1541B
2
CPU364 Configuration
Before you can use the Ethernet Interface with the Series 90-30 PLC, you must configure the
Interface using the PLC programming software. The PLC programming software allows you to
specify the modules and I/O that will reside in your Series 90-30 PLC rack(s). The Hand Held
Programmer can not be used to configure the Ethernet Interface.
For the Ethernet Interface specifically, the configuration software allows you to:
ƒ Define the Status address of the Ethernet Interface.
ƒ Assign the IP address for the Ethernet Interface, and optionally the subnet mask, the gateway
address, and the name server address.
ƒ Configure the serial ports (optional).
Configuring the Interface Using Windows-Based Programming Software.
To configure the Ethernet Interface using Logic Developer, Control or VersaPro
 programming
software, do the following:
1 . In Control and VersaPro , from the Browser, double-click Hardware Configuration icon.
The Local Rack Window will appear. In Logic Developer, expand the hardware
configuration and the main rack in the browser.
2 . In Control and VersaPro
, click the Main tab.
3 . Click the CPU slot, press the right mouse button, and choose Replace Module. The Module
Catalog dialog box will appear.
4 . In the Module Catalog dialog box, select CPU model IC693CPU364, then click the OK
button. Follow the instructions on the screen until the Parameters dialog box appears.
5 . The Parameters dialog box will allow you to edit the module’s parameters. To edit a
parameter value, click the desired tab, then click in the appropriate Values field. The
Settings, Scan, and Memory tabs contain parameters that pertain directly to CPU operation.
Refer to Online Help for more information.
6 . The Ethernet and RS-232 tabs contain parameters directly related to the embedded Ethernet
Interface’s functionality. Some fields in the Ethernet tab must be filled in. The default
settings for the RS-232 tabs can be used. Refer to the topic “Configuration Parameters” that
follows for information on these fields. We recommend leaving the serial port parameters at
default settings.
7 . If you want to view the power consumption of this module, click the Power Consumption tab.
After you have configured all of the module’s applicable parameters, click the OK button.
The module will now appear in the selected slot.
8 . Store the configuration to the PLC so these settings can take effect.
For more information, refer to Online Help in the PLC programming software.
www.cadfamily.com EMail:[email protected]
The document is for study only,if tort to your rights,please inform us,we will delete