Motorola DSP96002 User Manual
Page 153
MOTOROLA
DSP96002 USER’S MANUAL
8 - 13
8.5.2.5 IRQB Trigger Mode - IBL2 (Bit 6)
The IRQB Trigger Mode (IBL2) bit specifies the trigger method for the external interrupt input IRQB.
8.5.2.6 IRQB Status - IRBS (Bit 7)
The read-only IRQB Status (IRBS) bit indicates the status of the interrupt request for the external interrupt
input IRQB. If the IRQB interrupt is defined as edge-sensitive and it is enabled, the IRBS bit indicates the
state of the edge-detection latch. If the IRQB interrupt is defined as level-sensitive or is disabled, the
IRBS bit indicates the state of the IRQB pin after internal synchronization.
8.5.2.7
IRQC Interrupt Priority Level - ICL1-ICL0 (Bits 8-9)
The IRQC Interrupt Priority Level (ICL1-ICL0) bits are used to enable and specify the priority level of the
external interrupt input IRQC.
8.5.2.8 IRQC Trigger Mode - ICL2 (Bit 10)
The IRQC Trigger Mode (ICL2) bit specifies the trigger method for the external interrupt input IRQC.
IBL1 IBL0 Enabled Int. Priority Level (IPL)
0
0
no
-
0
1
yes
0
1
0
yes
1
1
1
yes
2
IBL2 Trigger Mode
0
level
1
negative edge
IRBS Status (edge and enabled) IRQB pin (level or disabled)
0
Serviced
High
1
Pending
Low
ICL1 ICL0 Enabled Int. Priority Level (IPL)
0
0
no
-
0
1
yes
0
1
0
yes
1
1
1
yes
2